0201_APP/APP/tax.h

/*
 * @Description:
 * @Version: 2.0
 * @Author: Seven
 * @Date: 2023-09-08 09:08:43
 * @LastEditors: Seven
 * @LastEditTime: 2024-04-07 15:24:46
 */
#ifndef TAX_H__
#define TAX_H__


#include "stm32f10x.h"
#include "tools.h"

#define SINGLE_DATA      0	//当次交易
#define CUMULATIVE_DATA  1	//总累计

////////////////////////////////////明文///////////////////////////////////////////////////
//协议头
typedef struct _tTaxCommFrame
{
	//前导码+长度码 千帧号+命令码 +参数 +校验码
	uint8_t fhead;   							//帧头(1Byte)
	uint8_t flen;        						//帧长度(1Byte)
	uint8_t findex;        						//帧序号(1Byte)
	uint8_t fcmd;        						//命令码(1Byte)
//	uint16_t fcrc;        						//CRC校验(2Byte)
}tTaxCommFrame_t;


//////////////////////////////////////密文/////////////////////////////////////////////////
#define YTSF_0XA2_0X00   0xA2
#define YTSF_0XA1_0X11   0xA1
#define YTSF_0XA1_0X14   0xA4
//协议头
typedef struct _tYTSFCommFrame
{
	uint8_t fhead;   							//帧头(1Byte)
	uint8_t flen;        						//帧长度(1Byte)
	uint8_t findex;        						//帧序号(1Byte)
	uint8_t fport;        						//税控口编号(1Byte)，0税控口1，1税控口2
	uint8_t fcmd;        						//命令码(1Byte)
//	uint16_t fcrc;        						//CRC校验(2Byte)
}tYTSFCommFrame_t;



typedef struct _gun_info {
	uint8_t fail_count;
	uint8_t quality;				//油品
	uint8_t id;						//编号
	uint8_t status;					//工作状态
	uint64_t total_price;			//总累计金额
	uint64_t total_oil_volume;		//总体积
	uint32_t last_unit_price;		//最后一次加油的单价
	uint32_t last_oil_volume;		//最后一次加油的油量
	uint32_t last_price;			//最后一次加油的油价
	uint8_t gun_type;  //加油枪的数据类型：0当次数据；1 累计数据
	uint32_t gun_msgid; //加油枪序列号
	uint8_t time_day;
	uint8_t time_hour;
	uint8_t time_minute;
}__attribute__((packed))  gun_info_t;

typedef struct _tax_info {
	uint8_t monitor_serino[16];
	uint8_t coder_serino[20];
	uint8_t dispaly_serino[16];
	uint8_t gun_num;
	uint8_t factory;			/* 1: 英泰赛福 2: 拓盛 */
	uint8_t fail_count;
	uint8_t status;
	uint8_t gun_valid;
	uint8_t	taxpayer_reg_no[20];
	gun_info_t gun[8];
	uint8_t cmd_73_data[4];
	uint8_t tax_serino[10];
	uint8_t bmq_serino[10];
	uint8_t data73len;  // 73指令的长度
	//for  debug
	uint32_t tx_pkts;
	uint32_t rx_pkts;
	uint32_t rx_errs;
}__attribute__((packed))  tax_info_t ;
extern tax_info_t tax_info;


///////////////////////////////////////////////////////////////////////////////

typedef enum{
	TAX_GUN_LP_STATE_IDLE=0, 	//空闲状态
 	TAX_GUN_LP_STATE_83, 		//读取83指令，读取的是采集器有关的信息，上电读取一次就可以
	TAX_GUN_LP_STATE_89,		//总金额和总油量
	TAX_GUN_LP_STATE_86,		//单价 当次金额和当次油量
	TAX_GUN_LP_STATE_CH, 		//切换采集器 枪 或是报税口
	TAX_GUN_LP_STATE_FINISH,	//完成
	TAX_GUN_LP_STATE_UNKNOWN
}tTaxGunLpState_t;

#define TAX_MAX_NUM     2
#define GUN_MAX_NUM     8

//枪数据
typedef struct _gun_conf
{
	uint8_t gunid;							//加油枪编号
	uint16_t unit_price;					//单价
	uint32_t price;							//金额
	uint32_t volume;						//油量
	uint64_t totle_price;					//总金额
	uint64_t totle_volume;					//总油量
	timeout_t tt_ts;						//拓盛密文定时
}__attribute__((packed)) gun_conf_t;

//报税口数据
typedef struct _tax_conf
{
	uint8_t tax_id;							//报税口编号
	uint8_t gun_num;						//加油枪数量
	uint8_t alrd_sn;						//是否查询过加油机的信息
	uint8_t factory;						//厂家 1：英泰 2：拓盛
	uint8_t status;							//报税口的状态，是否连接
	uint8_t encrypt;						//报税口的加密状态，由服务器下发，暂没有用到
	uint8_t monitor_serino[16];				//税控序列号
	gun_conf_t gun_conf[GUN_MAX_NUM];		//枪信息
}__attribute__((packed)) tax_conf_t;

//采集器数据
typedef struct _coll_tax_conf
{
	uint8_t tax_num;						//报税口数量
	uint8_t tax_type;						//报税口类型，明文或密文
	uint8_t cmd_83;							//是否需要读83
	tax_conf_t tax_conf[TAX_MAX_NUM];		//报税口信息
}__attribute__((packed)) coll_tax_conf_t;
extern coll_tax_conf_t coll_tax_conf;

typedef struct _tax_read_info_t
{
	uint8_t tax_no;							//当前查询的报税口编号
	uint8_t cmd_no;							//当前查询的命令编号
	uint8_t read_flag;						//是否开始查询
	uint8_t uart_flag;						//串口定时是否结束
	uint8_t cmd_flag;						//命令间隔是否结束
	timeout_t tt_cmd_time;					//命令查询间隔
	timeout_t tt_uart;						//命令返回超时
}__attribute__((packed)) tax_read_info_t;


typedef struct _tax_send_info
{
	uint8_t start;
	uint8_t step;
	uint8_t send;
	uint8_t cmd;
	uint8_t gun;
	uint8_t uartid;
	uint8_t startcmd;
	//timeout_t tt_rcv;
	uint8_t dalen;
	uint8_t data[32];
}tax_send_info_t;
extern tax_send_info_t tax_send_info;

enum {
	CMD_72=0,
	CMD_73,
	CMD_70,
	CMD_8C,
	CMD_86,
};

extern void tax_send_start(uint8_t startCmd);
extern void tax_send_end(void);
uint16_t tax_send_cmd(uint8_t cmd, uint8_t gun, void *purse);
extern uint16_t tax_send_cmd_ciphertext(uint8_t cmd, uint8_t *data, uint8_t len, void *purse);
extern int tax_rcv_analyze(uint8_t *data, void *puser, uint16_t len);


void tax_test(void);

#endif // !