/*
 * @Description: 
 * @Version: 2.0
 * @Author: Seven
 * @Date: 2022-08-22 09:55:26
 * @LastEditors: Seven
 * @LastEditTime: 2023-04-28 15:39:14
 */
#ifndef __BSP_H
#define __BSP_H

#include "includes.h"
#include "tools.h"

//app版本号
#define SOFTWARE_VERSION_APP 0X02013130

#define EEPROM_VER                 0X01
#define EEPROM_FIRST_INIT_FLAG     0x55AA

extern const char PowerOn_Info[][64];
extern FunctionalState irq_state;

//任务执行次数
typedef struct _task_count_t
{
	uint32_t uart_count_cur;
	uint32_t uart_count_prev;
	uint32_t prog_count_cur;
	uint32_t prog_count_prev;
	uint32_t ota_count_cur;
	uint32_t ota_count_prev;
	uint32_t lora_count_cur;
	uint32_t lora_count_prev;
	uint32_t encoder_count_cur;
	uint32_t encoder_count_prev;
}__attribute__((packed)) task_count_t;
extern task_count_t task_count;
void watchdog_feed(void);

//共用体（float与u32）
union data_u 
{
   float dataf;
   uint32_t datai;
};
extern union data_u Voltage,Temperature;

#define REAL_TIME_TIMEOUT (10*1000) //实时参数读取（电压、温度）

//工作模式
typedef enum DEV_WORK_STATE
{
	DEV_WORK_STATE_NORMAL,						//正常工作模式
	DEV_WORK_STATE_UPDATING,					//升级模式
	DEV_WORK_STATE_PT,                         	//产测模式
	DEV_WORK_STATE_UNINIT,                     	//出厂信息未初始化模式
	DEV_WORK_STATE_XSP_UPDATING,				//显示屏升级模式
//	DEV_WORK_STATE_UPDATE_RETRANSMIT,			//	
//	DEV_WORK_STATE_ONLOOKER,                   	//旁观者模式
//	DEV_WORK_STATE_OTA_BEGIN,                  	//开始升级模式
//	DEV_WORK_STATE_OTA_CONTINUOUS,             	//升级中连续收包模式
//	DEV_WORK_STATE_OTA_RETRANSMIT,             	//升级中重传模式
//	DEV_WORK_STATE_OTA_UPGRADE_RCV_END,        	//升级中升级包接收完成模式
//	DEV_WORK_STATE_UPDATE_MASTER,              	//主设备升级模式
//	DEV_WORK_STATE_UPLOAD_SLAVE,               	//从设备主动上报升级状态模式
	
	DEV_WORK_STATE_MAX
}DEV_WORK_STATE_T;


//设备可配置信息,需存eeprom
typedef struct _device_info
{
	uint8_t alrd;                 	//是否配置的标记
	uint32_t device_sn;            	//设备sn
	uint16_t device_type;          	//设备类型
	uint16_t manufactures;         	//产品制造商
	uint16_t batch_number;         	//批次号
	uint32_t production_data;      	//出厂日期
	uint8_t  pcb_ver;              	//PCB版本
}__attribute__((packed)) device_info_t;
extern device_info_t device_info;

//设备固定信息，不需在app中写eeprom
typedef struct _device_fixed_info
{
	uint32_t Soft_ver_app;       	//app版本号
	uint32_t Soft_ver_boot;      	//bootloader版本号
	uint8_t MCU_UUID[12];        	//MCU的UUID
	uint16_t MCU_Type_ID;        	//MCU的芯片类型
	uint32_t Reset_total_cnt;    	//复位总次数
	uint8_t Last_reset_flag;     	//上次复位类型
	uint8_t Encrypt;             	//明密文状态
	uint8_t Work_State;          	//当前工作状态
	uint32_t Voltage;            	//电压
	uint32_t Temperature;        	//温度
	uint8_t lora_para_group;     	//lora参数选择
	uint8_t master_updata_start; 	//主设备开始升级标志
	uint8_t slave_uploade_start; 	//从设备主动上报标志
	uint8_t reset_flag;				//采集器复位标记
	uint8_t xsp_update_start;		//显示屏开始升级标记

}device_fixed_info_t;
extern device_fixed_info_t device_fixed_info;


#define RS485_RX()  {GPIO_ResetBits(GPIOA, GPIO_Pin_1);}
#define RS485_TX()  {GPIO_SetBits(GPIOA, GPIO_Pin_1);}

void GPIO_COMM_Init(u32 clk, GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, GPIOMode_TypeDef mode, GPIOSpeed_TypeDef speed);
void BSP_Init(void);

void key_task_handle(uint8_t num);
uint8_t device_type_cmp(uint32_t device_fixed, uint16_t device_rcv);
int device_type_and_id_cmp_NoBroadcast(uint16_t device_type, uint32_t device_sn);
void device_real_time_para_read(void);
void device_irq_set(FunctionalState state);
void run_irq_set(void);
void device_module_reset(void);
#endif