9102_BOOT/logic/fpga_boot.qsf

# Design name Assignments, replace __design_name__ with actual design name
# ========================
set_global_assignment -name FAMILY "Cyclone IV E"
set_global_assignment -name DEVICE EP4CE75F29C8

set_global_assignment -name TOP_LEVEL_ENTITY "fpga_boot"
set_global_assignment -name SEARCH_PATH boot_ip

set_global_assignment -name VERILOG_FILE fpga_boot.v
set_global_assignment -name VERILOG_FILE boot_ip.v
set_global_assignment -name VERILOG_FILE "C:\\Users\\zzz17\\.platformio\\packages\\tool-agrv_logic\\etc\\arch\\rodinia\\alta_sim.v"

set_global_assignment -name SDC_FILE .\\fpga_boot.sdc


#set_global_assignment -name LOGICLOCK_INCREMENTAL_COMPILE_FILE "atom_netlists/__design_name__.vqm"

# Project-Wide Assignments
# ========================
set_global_assignment -name ORIGINAL_QUARTUS_VERSION 11.1
set_global_assignment -name PROJECT_CREATION_TIME_DATE "09:37:04  JANUARY 04, 2013"
set_global_assignment -name LAST_QUARTUS_VERSION 13.0
set_global_assignment -name PROJECT_OUTPUT_DIRECTORY ./quartus_logs
set_global_assignment -name NUM_PARALLEL_PROCESSORS ALL
set_global_assignment -name FLOW_ENABLE_IO_ASSIGNMENT_ANALYSIS ON
#set_global_assignment -name SMART_RECOMPILE ON

# Classic Timing Assignments
# ==========================
set_global_assignment -name MIN_CORE_JUNCTION_TEMP 0
set_global_assignment -name MAX_CORE_JUNCTION_TEMP 85

# Analysis & Synthesis Assignments
# ================================
set_global_assignment -name SYNTH_TIMING_DRIVEN_SYNTHESIS ON
set_global_assignment -name ADV_NETLIST_OPT_SYNTH_WYSIWYG_REMAP ON
#set_global_assignment -name MAX_BALANCING_DSP_BLOCKS 0
#set_global_assignment -name AUTO_ROM_RECOGNITION OFF
#set_global_assignment -name AUTO_RAM_RECOGNITION OFF
#set_global_assignment -name MAX_RAM_BLOCKS_M4K 0
set_global_assignment -name AUTO_OPEN_DRAIN_PINS OFF
# set_instance_assignment -name PRESERVE_REGISTER ON -to *
#set_instance_assignment -name PRESERVE_PLL_COUNTER_ORDER ON -to *
#set_instance_assignment -name MAX_NUMBER_OF_REGISTERS_FROM_UNINFERRED_RAMS 0 -to *

# Fitter Assignments
# ==================
set_global_assignment -name ERROR_CHECK_FREQUENCY_DIVISOR 1
set_global_assignment -name ROUTING_BACK_ANNOTATION_MODE OFF
set_global_assignment -name OPTIMIZE_HOLD_TIMING "IO PATHS AND MINIMUM TPD PATHS"
set_global_assignment -name FITTER_EFFORT "STANDARD FIT"
set_global_assignment -name ROUTER_TIMING_OPTIMIZATION_LEVEL MAXIMUM
set_global_assignment -name PLACEMENT_EFFORT_MULTIPLIER 10
set_global_assignment -name ROUTER_EFFORT_MULTIPLIER 10
set_global_assignment -name ECO_OPTIMIZE_TIMING ON
set_global_assignment -name FINAL_PLACEMENT_OPTIMIZATION ALWAYS
set_global_assignment -name FITTER_AGGRESSIVE_ROUTABILITY_OPTIMIZATION ALWAYS
set_global_assignment -name STRATIX_DEVICE_IO_STANDARD "3.3-V LVTTL"
set_global_assignment -name IO_PLACEMENT_OPTIMIZATION ON
set_global_assignment -name SEED 1
set_global_assignment -name FIT_ONLY_ONE_ATTEMPT OFF
set_global_assignment -name MAX_GLOBAL_CLOCKS_ALLOWED 6
set_global_assignment -name PHYSICAL_SYNTHESIS_COMBO_LOGIC ON
#set_global_assignment -name PHYSICAL_SYNTHESIS_REGISTER_RETIMING ON
#set_global_assignment -name PHYSICAL_SYNTHESIS_REGISTER_DUPLICATION ON
set_global_assignment -name PHYSICAL_SYNTHESIS_COMBO_LOGIC_FOR_AREA ON
set_global_assignment -name PHYSICAL_SYNTHESIS_EFFORT EXTRA

# EDA Netlist Writer Assignments
# ==============================
set_global_assignment -name EDA_SIMULATION_TOOL "ModelSim (Verilog)"

# LogicLock Region Assignments
# ============================
set_global_assignment -name LOGICLOCK_INCREMENTAL_COMPILE_ASSIGNMENT OFF

# Power Estimation Assignments
# ============================
set_global_assignment -name POWER_PRESET_COOLING_SOLUTION "23 MM HEAT SINK WITH 200 LFPM AIRFLOW"
set_global_assignment -name POWER_BOARD_THERMAL_MODEL "NONE (CONSERVATIVE)"

# start EDA_TOOL_SETTINGS(eda_simulation)
# ---------------------------------------

# EDA Netlist Writer Assignments
# ==============================
set_global_assignment -name EDA_TIME_SCALE "1 ps" -section_id eda_simulation
set_global_assignment -name EDA_OUTPUT_DATA_FORMAT "VERILOG HDL" -section_id eda_simulation

# end EDA_TOOL_SETTINGS(eda_simulation)
# -------------------------------------

# start DESIGN_PARTITION(Top)
# ---------------------------

# Incremental Compilation Assignments
# ===================================
set_global_assignment -name PARTITION_NETLIST_TYPE SOURCE -section_id Top
set_global_assignment -name PARTITION_FITTER_PRESERVATION_LEVEL PLACEMENT_AND_ROUTING -section_id Top
set_global_assignment -name PARTITION_COLOR 16764057 -section_id Top
set_global_assignment -name FLOW_DISABLE_ASSEMBLER ON

# end DESIGN_PARTITION(Top)
# -------------------------

set_global_assignment -name LL_ENABLED ON -section_id core_logic
set_global_assignment -name LL_AUTO_SIZE OFF -section_id core_logic
set_global_assignment -name LL_STATE LOCKED -section_id core_logic
set_global_assignment -name LL_RESERVED OFF -section_id core_logic
set_global_assignment -name LL_SECURITY_ROUTING_INTERFACE OFF -section_id core_logic
set_global_assignment -name LL_IGNORE_IO_BANK_SECURITY_CONSTRAINT OFF -section_id core_logic
set_global_assignment -name LL_PR_REGION OFF -section_id core_logic
set_global_assignment -name LL_WIDTH 20 -section_id core_logic
set_global_assignment -name LL_HEIGHT 12 -section_id core_logic
set_global_assignment -name LL_ORIGIN X43_Y1 -section_id core_logic
set_global_assignment -name LL_MEMBER_OF core_logic -section_id core_logic

set_global_assignment -name LL_ENABLED ON -section_id LOGIC_RESERVE_0
set_global_assignment -name LL_AUTO_SIZE OFF -section_id LOGIC_RESERVE_0
set_global_assignment -name LL_STATE LOCKED -section_id LOGIC_RESERVE_0
set_global_assignment -name LL_RESERVED ON -section_id LOGIC_RESERVE_0
set_global_assignment -name LL_SECURITY_ROUTING_INTERFACE OFF -section_id LOGIC_RESERVE_0
set_global_assignment -name LL_IGNORE_IO_BANK_SECURITY_CONSTRAINT OFF -section_id LOGIC_RESERVE_0
set_global_assignment -name LL_PR_REGION OFF -section_id LOGIC_RESERVE_0
set_global_assignment -name LL_WIDTH 13 -section_id LOGIC_RESERVE_0
set_global_assignment -name LL_HEIGHT 8 -section_id LOGIC_RESERVE_0
set_global_assignment -name LL_ORIGIN X43_Y5 -section_id LOGIC_RESERVE_0

set_global_assignment -name MAX_BALANCING_DSP_BLOCKS 0
set_global_assignment -name MAX_RAM_BLOCKS_M4K 4

set_location_assignment LCCOMB_X43_Y4_N0 -to gpio2_io_in[0]
set_location_assignment LCCOMB_X43_Y4_N2 -to gpio2_io_in[1]
set_location_assignment LCCOMB_X43_Y4_N4 -to gpio2_io_in[2]
set_location_assignment LCCOMB_X43_Y4_N6 -to gpio2_io_in[3]
set_location_assignment LCCOMB_X43_Y4_N8 -to gpio2_io_in[4]
set_location_assignment LCCOMB_X43_Y4_N10 -to gpio2_io_in[5]
set_location_assignment LCCOMB_X43_Y4_N12 -to gpio2_io_in[6]
set_location_assignment LCCOMB_X43_Y4_N14 -to gpio2_io_in[7]
set_location_assignment LCCOMB_X43_Y4_N16 -to gpio2_io_out_en[3]
set_location_assignment LCCOMB_X43_Y4_N18 -to gpio2_io_out_en[4]
set_location_assignment LCCOMB_X43_Y4_N20 -to gpio2_io_out_en[5]
set_location_assignment LCCOMB_X43_Y4_N22 -to gpio2_io_out_en[6]
set_location_assignment LCCOMB_X43_Y4_N24 -to gpio2_io_out_en[7]
set_location_assignment LCCOMB_X43_Y4_N26 -to gpio3_io_out_data[0]
set_location_assignment LCCOMB_X43_Y4_N28 -to gpio3_io_out_data[1]
set_location_assignment LCCOMB_X43_Y4_N30 -to gpio3_io_out_data[2]
set_location_assignment LCCOMB_X43_Y3_N0 -to gpio3_io_out_data[3]
set_location_assignment LCCOMB_X43_Y3_N2 -to gpio3_io_out_data[4]
set_location_assignment LCCOMB_X43_Y3_N4 -to gpio3_io_out_data[5]
set_location_assignment LCCOMB_X43_Y3_N6 -to gpio3_io_out_data[6]

set_location_assignment LCCOMB_X44_Y4_N0 -to gpio3_io_in[0]
set_location_assignment LCCOMB_X44_Y4_N2 -to gpio3_io_in[1]
set_location_assignment LCCOMB_X44_Y4_N4 -to gpio3_io_in[2]
set_location_assignment LCCOMB_X44_Y4_N6 -to gpio3_io_in[3]
set_location_assignment LCCOMB_X44_Y4_N8 -to gpio3_io_in[4]
set_location_assignment LCCOMB_X44_Y4_N10 -to gpio3_io_in[5]
set_location_assignment LCCOMB_X44_Y4_N12 -to gpio3_io_in[6]
set_location_assignment LCCOMB_X44_Y4_N14 -to gpio3_io_in[7]
set_location_assignment LCCOMB_X44_Y4_N16 -to gpio3_io_out_data[7]
set_location_assignment LCCOMB_X44_Y4_N18 -to gpio3_io_out_en[0]
set_location_assignment LCCOMB_X44_Y4_N20 -to gpio3_io_out_en[1]
set_location_assignment LCCOMB_X44_Y4_N22 -to gpio3_io_out_en[2]
set_location_assignment LCCOMB_X44_Y4_N24 -to gpio3_io_out_en[3]
set_location_assignment LCCOMB_X44_Y4_N26 -to gpio3_io_out_en[4]
set_location_assignment LCCOMB_X44_Y4_N28 -to gpio3_io_out_en[5]
set_location_assignment LCCOMB_X44_Y4_N30 -to gpio3_io_out_en[6]
set_location_assignment LCCOMB_X44_Y3_N0 -to gpio3_io_out_en[7]
set_location_assignment LCCOMB_X44_Y3_N2 -to gpio4_io_out_data[0]
set_location_assignment LCCOMB_X44_Y3_N4 -to gpio4_io_out_data[1]
set_location_assignment LCCOMB_X44_Y3_N6 -to gpio4_io_out_data[2]

set_location_assignment LCCOMB_X45_Y4_N0 -to gpio4_io_in[0]
set_location_assignment LCCOMB_X45_Y4_N2 -to gpio4_io_in[1]
set_location_assignment LCCOMB_X45_Y4_N4 -to gpio4_io_in[2]
set_location_assignment LCCOMB_X45_Y4_N6 -to gpio4_io_in[3]
set_location_assignment LCCOMB_X45_Y4_N8 -to gpio4_io_in[4]
set_location_assignment LCCOMB_X45_Y4_N10 -to gpio4_io_in[5]
set_location_assignment LCCOMB_X45_Y4_N12 -to gpio4_io_in[6]
set_location_assignment LCCOMB_X45_Y4_N14 -to gpio4_io_in[7]
set_location_assignment LCCOMB_X45_Y4_N16 -to gpio4_io_out_data[3]
set_location_assignment LCCOMB_X45_Y4_N18 -to gpio4_io_out_data[4]
set_location_assignment LCCOMB_X45_Y4_N20 -to gpio4_io_out_data[5]
set_location_assignment LCCOMB_X45_Y4_N22 -to gpio4_io_out_data[6]
set_location_assignment LCCOMB_X45_Y4_N24 -to gpio4_io_out_data[7]
set_location_assignment LCCOMB_X45_Y4_N26 -to gpio4_io_out_en[0]
set_location_assignment LCCOMB_X45_Y4_N28 -to gpio4_io_out_en[1]
set_location_assignment LCCOMB_X45_Y4_N30 -to gpio4_io_out_en[2]
set_location_assignment LCCOMB_X45_Y3_N0 -to gpio4_io_out_en[3]
set_location_assignment LCCOMB_X45_Y3_N2 -to gpio4_io_out_en[4]
set_location_assignment LCCOMB_X45_Y3_N4 -to gpio4_io_out_en[5]
set_location_assignment LCCOMB_X45_Y3_N6 -to gpio4_io_out_en[6]

set_location_assignment LCCOMB_X46_Y4_N0 -to gpio5_io_in[0]
set_location_assignment LCCOMB_X46_Y4_N2 -to gpio5_io_in[1]
set_location_assignment LCCOMB_X46_Y4_N4 -to gpio5_io_in[2]
set_location_assignment LCCOMB_X46_Y4_N6 -to gpio5_io_in[3]
set_location_a