2006_BOOT/logic/db/altpll_9g32.tdf

--altpll bandwidth_type="AUTO" CBX_DECLARE_ALL_CONNECTED_PORTS="OFF" clk0_divide_by=4 clk0_multiply_by=120 clk0_phase_shift="0" clk1_divide_by=4 clk1_multiply_by=120 clk1_phase_shift="0" clk2_divide_by=4 clk2_multiply_by=120 clk2_phase_shift="0" clk3_divide_by=8 clk3_multiply_by=120 clk3_phase_shift="0" clk4_divide_by=4 clk4_multiply_by=120 clk4_phase_shift="0" compensate_clock="CLK0" device_family="Cyclone IV E" inclk0_input_frequency=125000 intended_device_family="Cyclone IV E" operation_mode="normal" pll_type="AUTO" port_clk0="PORT_USED" port_clk1="PORT_UNUSED" port_clk2="PORT_UNUSED" port_clk3="PORT_USED" port_clk4="PORT_UNUSED" width_clock=5 width_phasecounterselect=3 areset clk inclk locked CARRY_CHAIN="MANUAL" CARRY_CHAIN_LENGTH=48
--VERSION_BEGIN 13.0 cbx_altclkbuf 2013:04:24:18:08:47:SJ cbx_altiobuf_bidir 2013:04:24:18:08:47:SJ cbx_altiobuf_in 2013:04:24:18:08:47:SJ cbx_altiobuf_out 2013:04:24:18:08:47:SJ cbx_altpll 2013:04:24:18:08:47:SJ cbx_cycloneii 2013:04:24:18:08:47:SJ cbx_lpm_add_sub 2013:04:24:18:08:47:SJ cbx_lpm_compare 2013:04:24:18:08:47:SJ cbx_lpm_counter 2013:04:24:18:08:47:SJ cbx_lpm_decode 2013:04:24:18:08:47:SJ cbx_lpm_mux 2013:04:24:18:08:47:SJ cbx_mgl 2013:04:24:18:11:10:SJ cbx_stratix 2013:04:24:18:08:47:SJ cbx_stratixii 2013:04:24:18:08:47:SJ cbx_stratixiii 2013:04:24:18:08:47:SJ cbx_stratixv 2013:04:24:18:08:47:SJ cbx_util_mgl 2013:04:24:18:08:47:SJ  VERSION_END


-- Copyright (C) 1991-2013 Altera Corporation
--  Your use of Altera Corporation's design tools, logic functions 
--  and other software and tools, and its AMPP partner logic 
--  functions, and any output files from any of the foregoing 
--  (including device programming or simulation files), and any 
--  associated documentation or information are expressly subject 
--  to the terms and conditions of the Altera Program License 
--  Subscription Agreement, Altera MegaCore Function License 
--  Agreement, or other applicable license agreement, including, 
--  without limitation, that your use is for the sole purpose of 
--  programming logic devices manufactured by Altera and sold by 
--  Altera or its authorized distributors.  Please refer to the 
--  applicable agreement for further details.


FUNCTION cycloneive_pll (areset, clkswitch, configupdate, fbin, inclk[1..0], pfdena, phasecounterselect[phasecounterselect_width-1..0], phasestep, phaseupdown, scanclk, scanclkena, scandata)
WITH ( AUTO_SETTINGS, BANDWIDTH, BANDWIDTH_TYPE, C0_HIGH, C0_INITIAL, C0_LOW, C0_MODE, C0_PH, C0_TEST_SOURCE, C1_HIGH, C1_INITIAL, C1_LOW, C1_MODE, C1_PH, C1_TEST_SOURCE, C1_USE_CASC_IN, C2_HIGH, C2_INITIAL, C2_LOW, C2_MODE, C2_PH, C2_TEST_SOURCE, C2_USE_CASC_IN, C3_HIGH, C3_INITIAL, C3_LOW, C3_MODE, C3_PH, C3_TEST_SOURCE, C3_USE_CASC_IN, C4_HIGH, C4_INITIAL, C4_LOW, C4_MODE, C4_PH, C4_TEST_SOURCE, C4_USE_CASC_IN, CHARGE_PUMP_CURRENT, CHARGE_PUMP_CURRENT_BITS, CLK0_COUNTER, CLK0_DIVIDE_BY, CLK0_DUTY_CYCLE, CLK0_MULTIPLY_BY, CLK0_OUTPUT_FREQUENCY, CLK0_PHASE_SHIFT, CLK0_PHASE_SHIFT_NUM, clk0_use_even_counter_mode, clk0_use_even_counter_value, CLK1_COUNTER, CLK1_DIVIDE_BY, CLK1_DUTY_CYCLE, CLK1_MULTIPLY_BY, CLK1_OUTPUT_FREQUENCY, CLK1_PHASE_SHIFT, CLK1_PHASE_SHIFT_NUM, clk1_use_even_counter_mode, clk1_use_even_counter_value, CLK2_COUNTER, CLK2_DIVIDE_BY, CLK2_DUTY_CYCLE, CLK2_MULTIPLY_BY, CLK2_OUTPUT_FREQUENCY, CLK2_PHASE_SHIFT, CLK2_PHASE_SHIFT_NUM, clk2_use_even_counter_mode, clk2_use_even_counter_value, CLK3_COUNTER, CLK3_DIVIDE_BY, CLK3_DUTY_CYCLE, CLK3_MULTIPLY_BY, CLK3_OUTPUT_FREQUENCY, CLK3_PHASE_SHIFT, CLK3_PHASE_SHIFT_NUM, clk3_use_even_counter_mode, clk3_use_even_counter_value, CLK4_COUNTER, CLK4_DIVIDE_BY, CLK4_DUTY_CYCLE, CLK4_MULTIPLY_BY, CLK4_OUTPUT_FREQUENCY, CLK4_PHASE_SHIFT, CLK4_PHASE_SHIFT_NUM, clk4_use_even_counter_mode, clk4_use_even_counter_value, CLKOUT_WIDTH = 5, COMPENSATE_CLOCK, ENABLE_SWITCH_OVER_COUNTER, INCLK0_INPUT_FREQUENCY, INCLK1_INPUT_FREQUENCY, LOCK_HIGH, LOCK_LOW, lock_window_ui, lock_window_ui_bits, LOOP_FILTER_C, LOOP_FILTER_C_BITS, LOOP_FILTER_R, LOOP_FILTER_R_BITS, M, M_INITIAL, M_PH, M_TEST_SOURCE, N, OPERATION_MODE, PFD_MAX, PFD_MIN, PHASECOUNTERSELECT_WIDTH = 3, PLL_COMPENSATION_DELAY, PLL_TYPE, SCAN_CHAIN_MIF_FILE, self_reset_on_loss_lock, SIMULATION_TYPE, SWITCH_OVER_COUNTER, SWITCH_OVER_TYPE, TEST_BYPASS_LOCK_DETECT, USE_DC_COUPLING, VCO_CENTER, VCO_DIVIDE_BY, vco_frequency_control, VCO_MAX, VCO_MIN, VCO_MULTIPLY_BY, vco_phase_shift_step, VCO_POST_SCALE, VCO_RANGE_DETECTOR_HIGH_BITS, VCO_RANGE_DETECTOR_LOW_BITS)
RETURNS ( activeclock, clk[CLKOUT_WIDTH-1..0], clkbad[1..0], fbout, locked, phasedone, scandataout, scandone, vcooverrange, vcounderrange);

--synthesis_resources = cycloneive_pll 1 reg 1 
OPTIONS ALTERA_INTERNAL_OPTION = "SUPPRESS_DA_RULE_INTERNAL=C104;SUPPRESS_DA_RULE_INTERNAL=R101";

SUBDESIGN altpll_9g32
( 
	areset	:	input;
	clk[4..0]	:	output;
	inclk[1..0]	:	input;
	locked	:	output;
) 
VARIABLE 
	pll_lock_sync : dffe;
	pll1 : cycloneive_pll
		WITH (
			BANDWIDTH_TYPE = "auto",
			CLK0_DIVIDE_BY = 4,
			CLK0_MULTIPLY_BY = 120,
			CLK0_PHASE_SHIFT = "0",
			CLK1_DIVIDE_BY = 4,
			CLK1_MULTIPLY_BY = 120,
			CLK1_PHASE_SHIFT = "0",
			CLK2_DIVIDE_BY = 4,
			CLK2_MULTIPLY_BY = 120,
			CLK2_PHASE_SHIFT = "0",
			CLK3_DIVIDE_BY = 8,
			CLK3_MULTIPLY_BY = 120,
			CLK3_PHASE_SHIFT = "0",
			CLK4_DIVIDE_BY = 4,
			CLK4_MULTIPLY_BY = 120,
			CLK4_PHASE_SHIFT = "0",
			COMPENSATE_CLOCK = "clk0",
			INCLK0_INPUT_FREQUENCY = 125000,
			OPERATION_MODE = "normal",
			PLL_TYPE = "auto"
		);

BEGIN 
	pll_lock_sync.clk = pll1.locked;
	pll_lock_sync.clrn = (! areset);
	pll_lock_sync.d = B"1";
	pll1.areset = areset;
	pll1.fbin = pll1.fbout;
	pll1.inclk[] = inclk[];
	clk[] = ( pll1.clk[4..0]);
	locked = (pll1.locked & pll_lock_sync.q);
END;
--VALID FILE