| 1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768 |
- SYSCLK 240
- HSECLK 8
- SPI0_HOLDN_IO3 PIN_97
- SPI0_SCK PIN_98
- SPI0_SI_IO0 PIN_2
- SPI0_WPN_IO2 PIN_3
- SPI0_SO_IO1 PIN_4
- SPI0_CSN PIN_5
- GPIO6_2 PIN_23 # IO_Button1
- GPIO6_4 PIN_24 # IO_Button2
- GPIO6_5 PIN_29 # IO_Switch1, must be disabled if DAC0 is used
- GPIO6_6 PIN_30 # IO_Switch2, must be disabled if DAC1 is used
- # Uncomment this line to use EXT_INT0. This is commented out by default because INT_Init() will stuck if PIN_24 is not
- # weakly pulled up. For example, when this .ve is used on an unintended board.
- # EXT_INT0 PIN_24
- USB0_ID PIN_78
- UART0_UARTRXD PIN_69
- UART0_UARTTXD PIN_68
- UART1_UARTTXD PIN_67
- UART1_UARTRXD PIN_66
- # Pins for RMII
- MAC0_RXD0 PIN_64
- MAC0_RXD1 PIN_63
- MAC0_TXD0 PIN_58
- MAC0_TXD1 PIN_57
- MAC0_TX_EN PIN_54
- MAC0_CRS PIN_43
- MAC0_RX_ER PIN_41
- # Extra pins for MII
- # MAC0_RX_DV PIN_65
- # MAC0_RXD2 PIN_62
- # MAC0_RXD3 PIN_61
- # MAC0_TXD2 PIN_56
- # MAC0_TXD3 PIN_55
- # MAC0_COL PIN_42
- # MAC0_RX_CLK PIN_60 # Do NOT assign MAC0_RX_CLK in RMII mode. It should come from the same source as MAC0_TX_CLK
- # MAC reset, MDC, MDIO, and clocks
- GPIO5_5 PIN_53 # MAC0_PHYRSTB, any avaible GPIO
- MAC0_MDC PIN_45
- MAC0_MDIO PIN_44
- MAC0_TX_CLK PIN_59 # Optional. If not assigned, MAC will use MAC0_CLK_OUT.
- MAC0_CLK_OUT PIN_40
- # INTB is shared with RXD2 on 32-pin. It can be used only in RMII mode.
- MAC0_PHY_INTB PIN_62
- CAN0_TX0 PIN_39
- CAN0_RX0 PIN_38
- I2C0_SDA PIN_36
- I2C0_SCL PIN_35
- GPIO4_1 PIN_34 # LED1
- GPIO4_2 PIN_33 # LED2
- GPIO4_3 PIN_32 # LED3
- GPIO4_4 PIN_31 # LED4
- GPTIMER1_CH0 PIN_7
- GPTIMER4_CH0 PIN_15
|
