0101_BOOT/SX127x/sx1276-LoRa.h

/*
 * THE FOLLOWING FIRMWARE IS PROVIDED: (1) "AS IS" WITH NO WARRANTY; AND
 * (2)TO ENABLE ACCESS TO CODING INFORMATION TO GUIDE AND FACILITATE CUSTOMER.
 * CONSEQUENTLY, SEMTECH SHALL NOT BE HELD LIABLE FOR ANY DIRECT, INDIRECT OR
 * CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE CONTENT
 * OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING INFORMATION
 * CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
 *
 * Copyright (C) SEMTECH S.A.
 */
/*!
 * \file       sx1276-LoRa.h
 * \brief      SX1276 RF chip driver mode LoRa
 *
 * \version    2.0.B2
 * \date       May 6 2013
 * \author     Gregory Cristian
 *
 * Last modified by Miguel Luis on Jun 19 2013
 */
#ifndef __SX1276_LORA_H__
#define __SX1276_LORA_H__

/*!
 * SX1276 LoRa General parameters definition
 */
typedef struct sLoRaSettings
{
    uint32_t	RFFrequency;
    int8_t		Power;
    uint8_t 	SignalBw;                   // LORA [0: 7.8 kHz, 1: 10.4 kHz, 2: 15.6 kHz, 3: 20.8 kHz, 4: 31.2 kHz,
                                        // 5: 41.6 kHz, 6: 62.5 kHz, 7: 125 kHz, 8: 250 kHz, 9: 500 kHz, other: Reserved]
    uint8_t 	SpreadingFactor;            // LORA [6: 64, 7: 128, 8: 256, 9: 512, 10: 1024, 11: 2048, 12: 4096  chips]
    uint8_t		ErrorCoding;                // LORA [1: 4/5, 2: 4/6, 3: 4/7, 4: 4/8]
    bool 			CrcOn;                         // [0: OFF, 1: ON]
    bool 			ImplicitHeaderOn;              // [0: OFF, 1: ON]
    bool 			RxSingleOn;                    // [0: Continuous, 1 Single]
    bool 			FreqHopOn;                     // [0: OFF, 1: ON]
    uint8_t 	HopPeriod;                  // Hops every frequency hopping period symbols
    uint32_t 	TxPacketTimeout;
    uint32_t 	RxPacketTimeout;
    uint8_t 	PayloadLength;
}tLoRaSettings;

/*!
 * RF packet definition
 */
#define RF_BUFFER_SIZE_MAX                          256
#define RF_BUFFER_SIZE                              256

/*!
 * RF state machine
 */
//LoRa
typedef enum
{
    RFLR_STATE_IDLE,
    RFLR_STATE_RX_INIT,
    RFLR_STATE_RX_RUNNING,
    RFLR_STATE_RX_DONE,
    RFLR_STATE_RX_TIMEOUT,
    RFLR_STATE_TX_INIT,
    RFLR_STATE_TX_RUNNING,
    RFLR_STATE_TX_DONE,
    RFLR_STATE_TX_TIMEOUT,
    RFLR_STATE_CAD_INIT,
    RFLR_STATE_CAD_RUNNING
}tRFLRStates;

/*!
 * SX1276 definitions
 */
#define XTAL_FREQ                                   32000000
#define FREQ_STEP                                   61.03515625

/*!
 * SX1276 Internal registers Address
 */
#define REG_LR_FIFO                                 0x00
// Common settings
#define REG_LR_OPMODE                               0x01
#define REG_LR_BANDSETTING                          0x04
#define REG_LR_FRFMSB                               0x06
#define REG_LR_FRFMID                               0x07
#define REG_LR_FRFLSB                               0x08
// Tx settings
#define REG_LR_PACONFIG                             0x09
#define REG_LR_PARAMP                               0x0A
#define REG_LR_OCP                                  0x0B
// Rx settings
#define REG_LR_LNA                                  0x0C
// LoRa registers
#define REG_LR_FIFOADDRPTR                          0x0D
#define REG_LR_FIFOTXBASEADDR                       0x0E
#define REG_LR_FIFORXBASEADDR                       0x0F
#define REG_LR_FIFORXCURRENTADDR                    0x10
#define REG_LR_IRQFLAGSMASK                         0x11
#define REG_LR_IRQFLAGS                             0x12
#define REG_LR_NBRXBYTES                            0x13
#define REG_LR_RXHEADERCNTVALUEMSB                  0x14
#define REG_LR_RXHEADERCNTVALUELSB                  0x15
#define REG_LR_RXPACKETCNTVALUEMSB                  0x16
#define REG_LR_RXPACKETCNTVALUELSB                  0x17
#define REG_LR_MODEMSTAT                            0x18
#define REG_LR_PKTSNRVALUE                          0x19
#define REG_LR_PKTRSSIVALUE                         0x1A
#define REG_LR_RSSIVALUE                            0x1B
#define REG_LR_HOPCHANNEL                           0x1C
#define REG_LR_MODEMCONFIG1                         0x1D
#define REG_LR_MODEMCONFIG2                         0x1E
#define REG_LR_SYMBTIMEOUTLSB                       0x1F
#define REG_LR_PREAMBLEMSB                          0x20
#define REG_LR_PREAMBLELSB                          0x21
#define REG_LR_PAYLOADLENGTH                        0x22
#define REG_LR_PAYLOADMAXLENGTH                     0x23
#define REG_LR_HOPPERIOD                            0x24
#define REG_LR_FIFORXBYTEADDR                       0x25
#define REG_LR_MODEMCONFIG3                         0x26
// end of documented register in datasheet
// I/O settings
#define REG_LR_DIOMAPPING1                          0x40
#define REG_LR_DIOMAPPING2                          0x41
// Version
#define REG_LR_VERSION                              0x42
// Additional settings
#define REG_LR_PLLHOP                               0x44
#define REG_LR_TCXO                                 0x4B
#define REG_LR_PADAC                                0x4D
#define REG_LR_FORMERTEMP                           0x5B
#define REG_LR_BITRATEFRAC                          0x5D
#define REG_LR_AGCREF                               0x61
#define REG_LR_AGCTHRESH1                           0x62
#define REG_LR_AGCTHRESH2                           0x63
#define REG_LR_AGCTHRESH3                           0x64


/*!
 * SX1276 LoRa bit control definition
 */

/*!
 * RegFifo
 */

/*!
 * RegOpMode
 */
#define RFLR_OPMODE_LONGRANGEMODE_MASK              0x7F
#define RFLR_OPMODE_LONGRANGEMODE_OFF               0x00 // Default
#define RFLR_OPMODE_LONGRANGEMODE_ON                0x80

#define RFLR_OPMODE_ACCESSSHAREDREG_MASK            0xBF
#define RFLR_OPMODE_ACCESSSHAREDREG_ENABLE          0x40
#define RFLR_OPMODE_ACCESSSHAREDREG_DISABLE         0x00 // Default

#define RFLR_OPMODE_FREQMODE_ACCESS_MASK            0xF7
#define RFLR_OPMODE_FREQMODE_ACCESS_LF              0x08 // Default
#define RFLR_OPMODE_FREQMODE_ACCESS_HF              0x00

#define RFLR_OPMODE_MASK                            0xF8
#define RFLR_OPMODE_SLEEP                           0x00
#define RFLR_OPMODE_STANDBY                         0x01 // Default
#define RFLR_OPMODE_SYNTHESIZER_TX                  0x02
#define RFLR_OPMODE_TRANSMITTER                     0x03
#define RFLR_OPMODE_SYNTHESIZER_RX                  0x04
#define RFLR_OPMODE_RECEIVER                        0x05
// LoRa specific modes
#define RFLR_OPMODE_RECEIVER_SINGLE                 0x06
#define RFLR_OPMODE_CAD                             0x07

/*!
 * RegBandSetting
 */
#define RFLR_BANDSETTING_MASK                       0x3F
#define RFLR_BANDSETTING_AUTO                       0x00 // Default
#define RFLR_BANDSETTING_DIV_BY_1                   0x40
#define RFLR_BANDSETTING_DIV_BY_2                   0x80
#define RFLR_BANDSETTING_DIV_BY_6                   0xC0

/*!
 * RegFrf (MHz)
 */

#define RFLR_FRFMSB_434_MHZ                         0x6C // Default
#define RFLR_FRFMID_434_MHZ                         0x80 // Default
#define RFLR_FRFLSB_434_MHZ                         0x00 // Default

#define RFLR_FRFMSB_863_MHZ                         0xD7
#define RFLR_FRFMID_863_MHZ                         0xC0
#define RFLR_FRFLSB_863_MHZ                         0x00
#define RFLR_FRFMSB_864_MHZ                         0xD8
#define RFLR_FRFMID_864_MHZ                         0x00
#define RFLR_FRFLSB_864_MHZ                         0x00
#define RFLR_FRFMSB_865_MHZ                         0xD8
#define RFLR_FRFMID_865_MHZ                         0x40
#define RFLR_FRFLSB_865_MHZ                         0x00
#define RFLR_FRFMSB_866_MHZ                         0xD8
#define RFLR_FRFMID_866_MHZ                         0x80
#define RFLR_FRFLSB_866_MHZ                         0x00
#define RFLR_FRFMSB_867_MHZ                         0xD8
#define RFLR_FRFMID_867_MHZ                         0xC0
#define RFLR_FRFLSB_867_MHZ                         0x00
#define RFLR_FRFMSB_868_MHZ                         0xD9
#define RFLR_FRFMID_868_MHZ                         0x00
#define RFLR_FRFLSB_868_MHZ                         0x00
#define RFLR_FRFMSB_869_MHZ                         0xD9
#define RFLR_FRFMID_869_MHZ                         0x40
#define RFLR_FRFLSB_869_MHZ                         0x00
#define RFLR_FRFMSB_870_MHZ                         0xD9
#define RFLR_FRFMID_870_MHZ                         0x80
#define RFLR_FRFLSB_870_MHZ                         0x00

#define RFLR_FRFMSB_902_MHZ                         0xE1
#define RFLR_FRFMID_902_MHZ                         0x80
#define RFLR_FRFLSB_902_MHZ                         0x00
#define RFLR_FRFMSB_903_MHZ                         0xE1
#define RFLR_FRFMID_903_MHZ                         0xC0
#define RFLR_FRFLSB_903_MHZ                         0x00
#define RFLR_FRFMSB_904_MHZ                         0xE2
#define RFLR_FRFMID_904_MHZ                         0x00
#define RFLR_FRFLSB_904_MHZ                         0x00
#define RFLR_FRFMSB_905_MHZ                         0xE2
#define RFLR_FRFMID_905_MHZ                         0x40
#define RFLR_FRFLSB_905_MHZ                         0x00
#define RFLR_FRFMSB_906_MHZ                         0xE2
#define RFLR_FRFMID_906_MHZ                         0x80
#define RFLR_FRFLSB_906_MHZ                         0x00
#define RFLR_FRFMSB_907_MHZ                         0xE2
#define RFLR_FRFMID_907_MHZ                         0xC0
#define RFLR_FRFLSB_907_MHZ                         0x00
#define RFLR_FRFMSB_908_MHZ                         0xE3
#define RFLR_FRFMID_908_MHZ                         0x00
#define RFLR_FRFLSB_908_MHZ                         0x00
#define RFLR_FRFMSB_909_MHZ                         0xE3
#define RFLR_FRFMID_909_MHZ                         0x40
#define RFLR_FRFLSB_909_MHZ                         0x00
#define RFLR_FRFMSB_910_MHZ                         0xE3
#define RFLR_FRFMID_910_MHZ                         0x80
#define RFLR_FRFLSB_910_MHZ                         0x00
#define RFLR_FRFMSB_911_MHZ                         0xE3
#define RFLR_FRFMID_911_MHZ                         0xC0
#define RFLR_FRFLSB_911_MHZ                         0x00
#define RFLR_FRFMSB_912_MHZ                         0xE4
#define RFLR_FRFMID_912_MHZ                         0x00
#define RFLR_FRFLSB_912_MHZ                         0x00
#define RFLR_FRFMSB_913_MHZ                         0xE4
#define RFLR_FRFMID_913_MHZ                         0x40
#define RFLR_FRFLSB_913_MHZ                         0x00
#define RFLR_FRFMSB_914_MHZ                         0xE4
#define RFLR_FRFMID_914_MHZ                         0x80
#define RFLR_FRFLSB_914_MHZ                         0x00
#define RFLR_FRFMSB_915_MHZ                         0xE4  // Default
#define RFLR_FRFMID_915_MHZ                         0xC0  // Default
#define RFLR_FRFLSB_915_MHZ                         0x00  // Default
#define RFLR_FRFMSB_916_MHZ                         0xE5
#define RFLR_FRFMID_916_MHZ                         0x00
#define RFLR_FRFLSB_916_MHZ                         0x00
#define RFLR_FRFMSB_917_MHZ                         0xE5
#define RFLR_FRFMID_917_MHZ                         0x40
#define RFLR_FRFLSB_917_MHZ                         0x00
#define RFLR_FRFMSB_918_MHZ                         0xE5
#define RFLR_FRFMID_918_MHZ                         0x80
#define RFLR_FRFLSB_918_MHZ                         0x00
#define RFLR_FRFMSB_919_MHZ                         0xE5
#define RFLR_FRFMID_919_MHZ                         0xC0
#define RFLR_FRFLSB_919_MHZ                         0x00
#define RFLR_FRFMSB_920_MHZ                         0xE6
#define RFLR_FRFMID_920_MHZ                         0x00
#define RFLR_FRFLSB_920_MHZ                         0x00
#define RFLR_FRFMSB_921_MHZ                         0xE6
#define RFLR_FRFMID_921_MHZ                         0x40
#define RFLR_FRFLSB_921_MHZ                         0x00
#define RFLR_FRFMSB_922_MHZ                         0xE6
#define RFLR_FRFMID_922_MHZ                         0x80
#define RFLR_FRFLSB_922_MHZ                         0x00
#define RFLR_FRFMSB_923_MHZ                         0xE6
#define RFLR_FRFMID_923_MHZ                         0xC0
#define RFLR_FRFLSB_923_MHZ                         0x00
#define RFLR_FRFMSB_924_MHZ                         0xE7
#define RFLR_FRFMID_924_MHZ                         0x00
#define RFLR_FRFLSB_924_MHZ                         0x00
#define RFLR_FRFMSB_925_MHZ                         0xE7
#define RFLR_FRFMID_925_MHZ                         0x40
#define RFLR_FRFLSB_925_MHZ                         0x00
#define RFLR_FRFMSB_926_MHZ                         0xE7
#define RFLR_FRFMID_926_MHZ                         0x80
#define RFLR_FRFLSB_926_MHZ                         0x00
#define RFLR_FRFMSB_927_MHZ                         0xE7
#define RFLR_FRFMID_927_MHZ                         0xC0
#define RFLR_FRFLSB_927_MHZ                         0x00
#define RFLR_FRFMSB_928_MHZ                         0xE8
#define RFLR_FRFMID_928_MHZ                         0x00
#define RFLR_FRFLSB_928_MHZ                         0x00

/*!
 * RegPaConfig
 */
#define RFLR_PACONFIG_PASELECT_MASK                 0x7F
#define RFLR_PACONFIG_PASELECT_PABOOST              0x80
#define RFLR_PACONFIG_PASELECT_RFO                  0x00 // Default

#define RFLR_PACONFIG_MAX_POWER_MASK                0x8F

#define RFLR_PACONFIG_OUTPUTPOWER_MASK              0xF0

/*!
 * RegPaRamp
 */
#define RFLR_PARAMP_TXBANDFORCE_MASK                0xEF
#define RFLR_PARAMP_TXBANDFORCE_BAND_SEL            0x10
#define RFLR_PARAMP_TXBANDFORCE_AUTO                0x00 // Default

#define RFLR_PARAMP_MASK                            0xF0
#define RFLR_PARAMP_3400_US                         0x00
#define RFLR_PARAMP_2000_US                         0x01
#define RFLR_PARAMP_1000_US                         0x02
#define RFLR_PARAMP_0500_US                         0x03
#define RFLR_PARAMP_0250_US                         0x04
#define RFLR_PARAMP_0125_US                         0x05
#define RFLR_PARAMP_0100_US                         0x06
#define RFLR_PARAMP_0062_US                         0x07
#define RFLR_PARAMP_0050_US                         0x08
#define RFLR_PARAMP_0040_US                         0x09 // Default
#define RFLR_PARAMP_0031_US                         0x0A
#define RFLR_PARAMP_0025_US                         0x0B
#define RFLR_PARAMP_0020_US                         0x0C
#define RFLR_PARAMP_0015_US                         0x0D
#define RFLR_PARAMP_0012_US                         0x0E
#define RFLR_PARAMP_0010_US                         0x0F

/*!
 * RegOcp
 */
#define RFLR_OCP_MASK                               0xDF
#define RFLR_OCP_ON                                 0x20 // Default
#define RFLR_OCP_OFF                                0x00

#define RFLR_OCP_TRIM_MASK                          0xE0
#define RFLR_OCP_TRIM_045_MA                        0x00
#define RFLR_OCP_TRIM_050_MA                        0x01
#define RFLR_OCP_TRIM_055_MA                        0x02
#define RFLR_OCP_TRIM_060_MA                        0x03
#define RFLR_OCP_TRIM_065_MA                        0x04
#define RFLR_OCP_TRIM_070_MA                        0x05
#define RFLR_OCP_TRIM_075_MA                        0x06
#define RFLR_OCP_TRIM_080_MA                        0x07
#define RFLR_OCP_TRIM_085_MA                        0x08
#define RFLR_OCP_TRIM_090_MA                        0x09
#define RFLR_OCP_TRIM_095_MA                        0x0A
#define RFLR_OCP_TRIM_100_MA                        0x0B  // Default
#define RFLR_OCP_TRIM_105_MA                        0x0C
#define RFLR_OCP_TRIM_110_MA                        0x0D
#define RFLR_OCP_TRIM_115_MA                        0x0E
#define RFLR_OCP_TRIM_120_MA                        0x0F
#define RFLR_OCP_TRIM_130_MA                        0x10
#define RFLR_OCP_TRIM_140_MA                        0x11
#define RFLR_OCP_TRIM_150_MA                        0x12
#define RFLR_OCP_TRIM_160_MA                        0x13
#define RFLR_OCP_TRIM_170_MA                        0x14
#define RFLR_OCP_TRIM_180_MA                        0x15
#define RFLR_OCP_TRIM_190_MA                        0x16
#define RFLR_OCP_TRIM_200_MA                        0x17
#define RFLR_OCP_TRIM_210_MA                        0x18
#define RFLR_OCP_TRIM_220_MA                        0x19
#define RFLR_OCP_TRIM_230_MA                        0x1A
#define RFLR_OCP_TRIM_240_MA                        0x1B

/*!
 * RegLna
 */
#define RFLR_LNA_GAIN_MASK                          0x1F
#define RFLR_LNA_GAIN_G1                            0x20 // Default
#define RFLR_LNA_GAIN_G2                            0x40
#define RFLR_LNA_GAIN_G3                            0x60
#define RFLR_LNA_GAIN_G4                            0x80
#define RFLR_LNA_GAIN_G5                            0xA0
#define RFLR_LNA_GAIN_G6                            0xC0

#define RFLR_LNA_BOOST_LF_MASK                      0xE7
#define RFLR_LNA_BOOST_LF_DEFAULT                   0x00 // Default
#define RFLR_LNA_BOOST_LF_GAIN                      0x08
#define RFLR_LNA_BOOST_LF_IP3                       0x10
#define RFLR_LNA_BOOST_LF_BOOST                     0x18

#define RFLR_LNA_RXBANDFORCE_MASK                   0xFB
#define RFLR_LNA_RXBANDFORCE_BAND_SEL               0x04
#define RFLR_LNA_RXBANDFORCE_AUTO                   0x00 // Default

#define RFLR_LNA_BOOST_HF_MASK                      0xFC
#define RFLR_LNA_BOOST_HF_OFF                       0x00 // Default
#define RFLR_LNA_BOOST_HF_ON                        0x03

/*!
 * RegFifoAddrPtr
 */
#define RFLR_FIFOADDRPTR                            0x00 // Default

/*!
 * RegFifoTxBaseAddr
 */
#define RFLR_FIFOTXBASEADDR                         0x80 // Default

/*!
 * RegFifoTxBaseAddr
 */
#define RFLR_FIFORXBASEADDR                         0x00 // Default

/*!
 * RegFifoRxCurrentAddr (Read Only)
 */

/*!
 * RegIrqFlagsMask
 */
#define RFLR_IRQFLAGS_RXTIMEOUT_MASK                0x80
#define RFLR_IRQFLAGS_RXDONE_MASK                   0x40
#define RFLR_IRQFLAGS_PAYLOADCRCERROR_MASK          0x20
#define RFLR_IRQFLAGS_VALIDHEADER_MASK              0x10
#define RFLR_IRQFLAGS_TXDONE_MASK                   0x08
#define RFLR_IRQFLAGS_CADDONE_MASK                  0x04
#define RFLR_IRQFLAGS_FHSSCHANGEDCHANNEL_MASK       0x02
#define RFLR_IRQFLAGS_CADDETECTED_MASK              0x01

/*!
 * RegIrqFlags
 */
#define RFLR_IRQFLAGS_RXTIMEOUT                     0x80
#define RFLR_IRQFLAGS_RXDONE                        0x40
#define RFLR_IRQFLAGS_PAYLOADCRCERROR               0x20
#define RFLR_IRQFLAGS_VALIDHEADER                   0x10
#define RFLR_IRQFLAGS_TXDONE                        0x08
#define RFLR_IRQFLAGS_CADDONE                       0x04
#define RFLR_IRQFLAGS_FHSSCHANGEDCHANNEL            0x02
#define RFLR_IRQFLAGS_CADDETECTED                   0x01



/*!
 * RegFifoRxNbBytes (Read Only)    //
 */


/*!
 * RegRxHeaderCntValueMsb (Read Only)    //
 */


/*!
 * RegRxHeaderCntValueLsb (Read Only)    //
 */


/*!
 * RegRxPacketCntValueMsb (Read Only)    //
 */


/*!
 * RegRxPacketCntValueLsb (Read Only)    //
 */


/*!
 * RegModemStat (Read Only)    //
 */
#define RFLR_MODEMSTAT_RX_CR_MASK                   0x1F
#define RFLR_MODEMSTAT_MODEM_STATUS_MASK            0xE0

/*!
 * RegPktSnrValue (Read Only)    //
 */


/*!
 * RegPktRssiValue (Read Only)    //
 */


/*!
 * RegRssiValue (Read Only)    //
 */


/*!
 * RegModemConfig1
 */
#define RFLR_MODEMCONFIG1_BW_MASK                   0x0F

#define RFLR_MODEMCONFIG1_BW_7_81_KHZ               0x00
#define RFLR_MODEMCONFIG1_BW_10_41_KHZ              0x10
#define RFLR_MODEMCONFIG1_BW_15_62_KHZ              0x20
#define RFLR_MODEMCONFIG1_BW_20_83_KHZ              0x30
#define RFLR_MODEMCONFIG1_BW_31_25_KHZ              0x40
#define RFLR_MODEMCONFIG1_BW_41_66_KHZ              0x50
#define RFLR_MODEMCONFIG1_BW_62_50_KHZ              0x60
#define RFLR_MODEMCONFIG1_BW_125_KHZ                0x70 // Default
#define RFLR_MODEMCONFIG1_BW_250_KHZ                0x80
#define RFLR_MODEMCONFIG1_BW_500_KHZ                0x90

#define RFLR_MODEMCONFIG1_CODINGRATE_MASK           0xF1
#define RFLR_MODEMCONFIG1_CODINGRATE_4_5            0x02
#define RFLR_MODEMCONFIG1_CODINGRATE_4_6            0x04 // Default
#define RFLR_MODEMCONFIG1_CODINGRATE_4_7            0x06
#define RFLR_MODEMCONFIG1_CODINGRATE_4_8            0x08

#define RFLR_MODEMCONFIG1_IMPLICITHEADER_MASK       0xFE
#define RFLR_MODEMCONFIG1_IMPLICITHEADER_ON         0x01
#define RFLR_MODEMCONFIG1_IMPLICITHEADER_OFF        0x00 // Default

/*!
 * RegModemConfig2
 */
#define RFLR_MODEMCONFIG2_SF_MASK                   0x0F
#define RFLR_MODEMCONFIG2_SF_6                      0x60
#define RFLR_MODEMCONFIG2_SF_7                      0x70 // Default
#define RFLR_MODEMCONFIG2_SF_8                      0x80
#define RFLR_MODEMCONFIG2_SF_9                      0x90
#define RFLR_MODEMCONFIG2_SF_10                     0xA0
#define RFLR_MODEMCONFIG2_SF_11                     0xB0
#define RFLR_MODEMCONFIG2_SF_12                     0xC0

#define RFLR_MODEMCONFIG2_TXCONTINUOUSMODE_MASK     0xF7
#define RFLR_MODEMCONFIG2_TXCONTINUOUSMODE_ON       0x08
#define RFLR_MODEMCONFIG2_TXCONTINUOUSMODE_OFF      0x00

#define RFLR_MODEMCONFIG2_RXPAYLOADCRC_MASK         0xFB
#define RFLR_MODEMCONFIG2_RXPAYLOADCRC_ON           0x04
#define RFLR_MODEMCONFIG2_RXPAYLOADCRC_OFF          0x00 // Default

#define RFLR_MODEMCONFIG2_SYMBTIMEOUTMSB_MASK       0xFC
#define RFLR_MODEMCONFIG2_SYMBTIMEOUTMSB            0x00 // Default


/*!
 * RegHopChannel (Read Only)
 */
#define RFLR_HOPCHANNEL_PLL_LOCK_TIMEOUT_MASK       0x7F
#define RFLR_HOPCHANNEL_PLL_LOCK_FAIL               0x80
#define RFLR_HOPCHANNEL_PLL_LOCK_SUCCEED            0x00 // Default

#define RFLR_HOPCHANNEL_PAYLOAD_CRC16_MASK          0xBF
#define RFLR_HOPCHANNEL_PAYLOAD_CRC16_ON            0x40
#define RFLR_HOPCHANNEL_PAYLOAD_CRC16_OFF           0x00 // Default

#define RFLR_HOPCHANNEL_CHANNEL_MASK                0x3F


/*!
 * RegSymbTimeoutLsb
 */
#define RFLR_SYMBTIMEOUTLSB_SYMBTIMEOUT             0x64 // Default

/*!
 * RegPreambleLengthMsb
 */
#define RFLR_PREAMBLELENGTHMSB                      0x00 // Default

/*!
 * RegPreambleLengthLsb
 */
#define RFLR_PREAMBLELENGTHLSB                      0x08 // Default

/*!
 * RegPayloadLength
 */
#define RFLR_PAYLOADLENGTH                          0x0E // Default

/*!
 * RegPayloadMaxLength
 */
#define RFLR_PAYLOADMAXLENGTH                       0xFF // Default

/*!
 * RegHopPeriod
 */
#define RFLR_HOPPERIOD_FREQFOPPINGPERIOD            0x00 // Default


/*!
 * RegDioMapping1
 */
#define RFLR_DIOMAPPING1_DIO0_MASK                  0x3F
#define RFLR_DIOMAPPING1_DIO0_00                    0x00  // Default
#define RFLR_DIOMAPPING1_DIO0_01                    0x40
#define RFLR_DIOMAPPING1_DIO0_10                    0x80
#define RFLR_DIOMAPPING1_DIO0_11                    0xC0

#define RFLR_DIOMAPPING1_DIO1_MASK                  0xCF
#define RFLR_DIOMAPPING1_DIO1_00                    0x00  // Default
#define RFLR_DIOMAPPING1_DIO1_01                    0x10
#define RFLR_DIOMAPPING1_DIO1_10                    0x20
#define RFLR_DIOMAPPING1_DIO1_11                    0x30

#define RFLR_DIOMAPPING1_DIO2_MASK                  0xF3
#define RFLR_DIOMAPPING1_DIO2_00                    0x00  // Default
#define RFLR_DIOMAPPING1_DIO2_01                    0x04
#define RFLR_DIOMAPPING1_DIO2_10                    0x08
#define RFLR_DIOMAPPING1_DIO2_11                    0x0C

#define RFLR_DIOMAPPING1_DIO3_MASK                  0xFC
#define RFLR_DIOMAPPING1_DIO3_00                    0x00  // Default
#define RFLR_DIOMAPPING1_DIO3_01                    0x01
#define RFLR_DIOMAPPING1_DIO3_10                    0x02
#define RFLR_DIOMAPPING1_DIO3_11                    0x03

/*!
 * RegDioMapping2
 */
#define RFLR_DIOMAPPING2_DIO4_MASK                  0x3F
#define RFLR_DIOMAPPING2_DIO4_00                    0x00  // Default
#define RFLR_DIOMAPPING2_DIO4_01                    0x40
#define RFLR_DIOMAPPING2_DIO4_10                    0x80
#define RFLR_DIOMAPPING2_DIO4_11                    0xC0

#define RFLR_DIOMAPPING2_DIO5_MASK                  0xCF
#define RFLR_DIOMAPPING2_DIO5_00                    0x00  // Default
#define RFLR_DIOMAPPING2_DIO5_01                    0x10
#define RFLR_DIOMAPPING2_DIO5_10                    0x20
#define RFLR_DIOMAPPING2_DIO5_11                    0x30

#define RFLR_DIOMAPPING2_MAP_MASK                   0xFE
#define RFLR_DIOMAPPING2_MAP_PREAMBLEDETECT         0x01
#define RFLR_DIOMAPPING2_MAP_RSSI                   0x00  // Default

/*!
 * RegVersion (Read Only)
 */

/*!
 * RegAgcRef
 */

/*!
 * RegAgcThresh1
 */

/*!
 * RegAgcThresh2
 */

/*!
 * RegAgcThresh3
 */

/*!
 * RegFifoRxByteAddr (Read Only)
 */

/*!
 * RegPllHop
 */
#define RFLR_PLLHOP_FASTHOP_MASK                    0x7F
#define RFLR_PLLHOP_FASTHOP_ON                      0x80
#define RFLR_PLLHOP_FASTHOP_OFF                     0x00 // Default

/*!
 * RegTcxo
 */
#define RFLR_TCXO_TCXOINPUT_MASK                    0xEF
#define RFLR_TCXO_TCXOINPUT_ON                      0x10
#define RFLR_TCXO_TCXOINPUT_OFF                     0x00  // Default

/*!
 * RegPaDac
 */
#define RFLR_PADAC_20DBM_MASK                       0xF8
#define RFLR_PADAC_20DBM_ON                         0x07
#define RFLR_PADAC_20DBM_OFF                        0x04  // Default

/*!
 * RegPll
 */
#define RFLR_PLL_BANDWIDTH_MASK                     0x3F
#define RFLR_PLL_BANDWIDTH_75                       0x00
#define RFLR_PLL_BANDWIDTH_150                      0x40
#define RFLR_PLL_BANDWIDTH_225                      0x80
#define RFLR_PLL_BANDWIDTH_300                      0xC0  // Default

/*!
 * RegPllLowPn
 */
#define RFLR_PLLLOWPN_BANDWIDTH_MASK                0x3F
#define RFLR_PLLLOWPN_BANDWIDTH_75                  0x00
#define RFLR_PLLLOWPN_BANDWIDTH_150                 0x40
#define RFLR_PLLLOWPN_BANDWIDTH_225                 0x80
#define RFLR_PLLLOWPN_BANDWIDTH_300                 0xC0  // Default

/*!
 * RegModemConfig3
 */
#define RFLR_MODEMCONFIG3_LOWDATARATEOPTIMIZE_MASK  0xF7
#define RFLR_MODEMCONFIG3_LOWDATARATEOPTIMIZE_ON    0x08
#define RFLR_MODEMCONFIG3_LOWDATARATEOPTIMIZE_OFF   0x00 // Default

#define RFLR_MODEMCONFIG3_AGCAUTO_MASK              0xFB
#define RFLR_MODEMCONFIG3_AGCAUTO_ON                0x04 // Default
#define RFLR_MODEMCONFIG3_AGCAUTO_OFF               0x00

/*!
 * RegFormerTemp
 */

typedef struct sSX1276LR
{
    uint8_t RegFifo;                                // 0x00
    // Common settings
    uint8_t RegOpMode;                              // 0x01
    uint8_t RegRes02;                               // 0x02
    uint8_t RegRes03;                               // 0x03
    uint8_t RegBandSetting;                         // 0x04
    uint8_t RegRes05;                               // 0x05
    uint8_t RegFrfMsb;                              // 0x06
    uint8_t RegFrfMid;                              // 0x07
    uint8_t RegFrfLsb;                              // 0x08
    // Tx settings
    uint8_t RegPaConfig;                            // 0x09
    uint8_t RegPaRamp;                              // 0x0A
    uint8_t RegOcp;                                 // 0x0B
    // Rx settings
    uint8_t RegLna;                                 // 0x0C
    // LoRa registers
    uint8_t RegFifoAddrPtr;                         // 0x0D
    uint8_t RegFifoTxBaseAddr;                      // 0x0E
    uint8_t RegFifoRxBaseAddr;                      // 0x0F
    uint8_t RegFifoRxCurrentAddr;                   // 0x10
    uint8_t RegIrqFlagsMask;                        // 0x11
    uint8_t RegIrqFlags;                            // 0x12
    uint8_t RegNbRxBytes;                           // 0x13
    uint8_t RegRxHeaderCntValueMsb;                 // 0x14
    uint8_t RegRxHeaderCntValueLsb;                 // 0x15
    uint8_t RegRxPacketCntValueMsb;                 // 0x16
    uint8_t RegRxPacketCntValueLsb;                 // 0x17
    uint8_t RegModemStat;                           // 0x18
    uint8_t RegPktSnrValue;                         // 0x19
    uint8_t RegPktRssiValue;                        // 0x1A
    uint8_t RegRssiValue;                           // 0x1B
    uint8_t RegHopChannel;                          // 0x1C
    uint8_t RegModemConfig1;                        // 0x1D
    uint8_t RegModemConfig2;                        // 0x1E
    uint8_t RegSymbTimeoutLsb;                      // 0x1F
    uint8_t RegPreambleMsb;                         // 0x20
    uint8_t RegPreambleLsb;                         // 0x21
    uint8_t RegPayloadLength;                       // 0x22
    uint8_t RegMaxPayloadLength;                    // 0x23
    uint8_t RegHopPeriod;                           // 0x24
    uint8_t RegFifoRxByteAddr;                      // 0x25
    uint8_t RegModemConfig3;                        // 0x26
    uint8_t RegTestReserved27[0x30 - 0x27];         // 0x27-0x30
    uint8_t RegTestReserved31;                      // 0x31
    uint8_t RegTestReserved32[0x40 - 0x32];         // 0x32-0x40
    // I/O settings
    uint8_t RegDioMapping1;                         // 0x40
    uint8_t RegDioMapping2;                         // 0x41
    // Version
    uint8_t RegVersion;                             // 0x42
    // Additional settings
    uint8_t RegAgcRef;                              // 0x43
    uint8_t RegAgcThresh1;                          // 0x44
    uint8_t RegAgcThresh2;                          // 0x45
    uint8_t RegAgcThresh3;                          // 0x46
    // Test
    uint8_t RegTestReserved47[0x4B - 0x47];         // 0x47-0x4A
    // Additional settings
    uint8_t RegPllHop;                              // 0x4B
    uint8_t RegTestReserved4C;                      // 0x4C
    uint8_t RegPaDac;                               // 0x4D
    // Test
    uint8_t RegTestReserved4E[0x58-0x4E];           // 0x4E-0x57
    // Additional settings
    uint8_t RegTcxo;                                // 0x58
    // Test
    uint8_t RegTestReserved59;                      // 0x59
    // Test
    uint8_t RegTestReserved5B;                      // 0x5B
    // Additional settings
    uint8_t RegPll;                                 // 0x5C
    // Test
    uint8_t RegTestReserved5D;                      // 0x5D
    // Additional settings
    uint8_t RegPllLowPn;                            // 0x5E
    // Test
    uint8_t RegTestReserved5F[0x6C - 0x5F];         // 0x5F-0x6B
    // Additional settings
    uint8_t RegFormerTemp;                          // 0x6C
    // Test
    uint8_t RegTestReserved6D[0x71 - 0x6D];         // 0x6D-0x70
}tSX1276LR;

extern tSX1276LR* SX1276LR;


/*!
 * \brief Initializes the SX1276
 */
void SX1276LoRaInit( void );


/*!
 * \brief check SX1278 config
 */
bool SX1276LoraConfigCheck(void);

/*!
 * \brief Sets the SX1276 to datasheet default values
 */
void SX1276LoRaSetDefaults( void );

/*!
 * \brief Enables/Disables the LoRa modem
 *
 * \param [IN]: enable [true, false]
 */
void SX1276LoRaSetLoRaOn( bool enable );

/*!
 * \brief Sets the SX1276 operating mode
 *
 * \param [IN] opMode New operating mode
 */
void SX1276LoRaSetOpMode( uint8_t opMode );

/*!
 * \brief Gets the SX1276 operating mode
 *
 * \retval opMode Current operating mode
 */
uint8_t SX1276LoRaGetOpMode( void );

/*!
 * \brief Reads the current Rx gain setting
 *
 * \retval rxGain Current gain setting
 */
uint8_t SX1276LoRaReadRxGain( void );

/*!
 * \brief Trigs and reads the current RSSI value
 *
 * \retval rssiValue Current RSSI value in [dBm]
 */
double SX1276LoRaReadRssi( void );

/*!
 * \brief Gets the Rx gain value measured while receiving the packet
 *
 * \retval rxGainValue Current Rx gain value
 */
uint8_t SX1276LoRaGetPacketRxGain( void );

/*!
 * \brief Gets the SNR value measured while receiving the packet
 *
 * \retval snrValue Current SNR value in [dB]
 */
int8_t SX1276LoRaGetPacketSnr( void );

/*!
 * \brief Gets the RSSI value measured while receiving the packet
 *
 * \retval rssiValue Current RSSI value in [dBm]
 */
double SX1276LoRaGetPacketRssi( void );

/*!
 * \brief Sets the radio in Rx mode. Waiting for a packet
 */
void SX1276LoRaStartRx( void );

/*!
 * \brief Gets a copy of the current received buffer
 *
 * \param [IN]: buffer     Buffer pointer
 * \param [IN]: size       Buffer size
 */
void SX1276LoRaGetRxPacket( void *buffer, uint16_t *size );

/*!
 * \brief Sets a copy of the buffer to be transmitted
 *
 * \param [IN]: buffer     Buffer pointer
 * \param [IN]: size       Buffer size
 */
void SX1276LoRaSetTxPacket( const void *buffer, uint16_t size );

/*!
 * \brief Gets the current RFState
 *
 * \retval rfState Current RF state [RF_IDLE, RF_BUSY,
 *                                   RF_RX_DONE, RF_RX_TIMEOUT,
 *                                   RF_TX_DONE, RF_TX_TIMEOUT]
 */
uint8_t SX1276LoRaGetRFState( void );

/*!
 * \brief Sets the new state of the RF state machine
 *
 * \param [IN]: state New RF state machine state
 */
void SX1276LoRaSetRFState( uint8_t state );

/*!
 * \brief Process the LoRa modem Rx and Tx state machines depending on the
 *        SX1276 operating mode.
 *
 * \retval rfState Current RF state [RF_IDLE, RF_BUSY,
 *                                   RF_RX_DONE, RF_RX_TIMEOUT,
 *                                   RF_TX_DONE, RF_TX_TIMEOUT]
 */
uint32_t SX1276LoRaProcess( void );



uint32_t SX1276GetLoraTimeOnAir(uint8_t pktLen );

uint32_t SX1276GetLoraDataRate( void);

uint32_t getRadom(void);

//bool SX1276IsLoraChannelFree( int16_t rssiThresh );
#endif //__SX1276_LORA_H__