0101_BOOT/Bsp/usart.h

/**
  ********************************  STM32F10x  *********************************
  * @文件名     ： usart.h
  * @作者       ： sun
  * @库版本     ： V3.5.0
  * @文件版本   ： V1.0.0
  * @日期       ： 2016年05月09日
  * @摘要       ： USART头文件
  ******************************************************************************/

/* 定义防止递归包含 ----------------------------------------------------------*/
#ifndef _USART_H
#define _USART_H

/* 包含的头文件 --------------------------------------------------------------*/
#include "stm32f10x.h"
#include "stdio.h"

#define DEBUG_EN 1



#ifdef DEBUG_EN
#include <stdio.h> 
#define DEBUG(fmt, x...) \
do \
{ \
    printf(fmt,##x); \
}while(0)

#define DEBUG1(fmt, x...) \
do \
{ \
    printf("%s(Line %d): "fmt,__FUNCTION__,__LINE__, ##x); \
}while(0)

#define DEBUG2(fmt, x...) \
do \
{ \
    USART_printfHex(fmt,##x); \
}while(0)

#define DEBUG_F(fmt, x...) \
do \
{ \
    printf("%s %s(Line %d): "fmt,__FILE__,__FUNCTION__,__LINE__, ##x); \
}while(0)

#else
#define DEBUG(fmt, x...)
#define DEBUG1(fmt, x...)
#define DEBUG2(fmt, x...)
#define DEBUG_F(fmt, x...)
#endif

#define MAXLOADLEN 128

#define SYSTEMTICK_PERIOD_MS		1			//滴答时基，单位ms，缺省值10ms

/********************uart1****************************/

#define	USART1_BAUDRATE				115200		//波特率，缺省值115200
#define USART1_BUF_SIZE 			128	//接收一、二级缓冲区大小，缺省值2000
#define USART1_RECEIVE_OVERTIME		100			//字节超时时间, 单位为ms，缺省值100ms

extern uint8_t 					 USART1_ready_buf[];
extern volatile uint8_t  USART1_ready_buf_ok;
extern volatile uint16_t USART1_ready_buf_len;

#define	USART2_BAUDRATE				115200		//波特率，缺省值115200
#define USART2_BUF_SIZE 			128	//接收一、二级缓冲区大小，缺省值2000
#define USART2_RECEIVE_OVERTIME		100			//字节超时时间, 单位为ms，缺省值100ms

extern uint8_t 					 USART2_ready_buf[];
extern volatile uint8_t  USART2_ready_buf_ok;
extern volatile uint16_t USART2_ready_buf_len;

#define	UART4_BAUDRATE				115200		//波特率，缺省值115200
#define UART4_BUF_SIZE 			128	//接收一、二级缓冲区大小，缺省值2000
#define UART4_RECEIVE_OVERTIME		100			//字节超时时间, 单位为ms，缺省值100ms

extern uint8_t 					 UART4_ready_buf[];
extern volatile uint8_t  UART4_ready_buf_ok;
extern volatile uint8_t  UART4_ready_buf_len;


	

#define	UART5_BAUDRATE				9600		//波特率，缺省值115200
#define UART5_BUF_SIZE 			128	//接收一、二级缓冲区大小，缺省值2000
#define UART5_RECEIVE_OVERTIME		100			//字节超时时间, 单位为ms，缺省值100ms

extern uint8_t 					 UART5_ready_buf[];
extern volatile uint8_t  UART5_ready_buf_ok;
extern volatile uint16_t UART5_ready_buf_len;



/* 函数申明 ------------------------------------------------------------------*/
void USART_Initializes(void);

void USART1_SendByte(uint8_t Data);
void USART1_SendNByte(uint8_t *pData, uint16_t Length);
void USART1_Printf(uint8_t *String);


void USART2_SendByte(uint8_t Data);
void USART2_SendNByte(uint8_t *pData, uint16_t Length);
void USART2_Printf(uint8_t *String);


void UART4_SendByte(uint8_t Data);
void UART4_SendNByte(uint8_t *pData, uint16_t Length);
void UART4_Printf(uint8_t *String);


void UART5_SendByte(uint8_t Data);
void UART5_SendNByte(uint8_t *pData, uint16_t Length);
void UART5_Printf(uint8_t *String);


void USART_ReceiveOvertimeProcess(void);
void USART_printfHex(const uint8_t* SendChars,uint16_t len);


uint8_t Ascii2Hex(uint8_t *hex, uint8_t *ascii, uint8_t asciiLen);
uint8_t Hex2Ascii(uint8_t *ascii, uint8_t *hex, uint8_t hexLen);


void UsartToLora(void );


extern volatile uint8_t  m_state_code;

typedef enum
{
    M_STATE_IDLE=0,
    M_STATE_ERASE_APP1,
    M_STATE_ERASE_APP2,
    M_STATE_ERASE_APP3,
    M_STATE_CP_APP1_APP2,
    M_STATE_CP_APP3_APP1,
    M_STATE_CP_APP2_APP1,
    M_STATE_RD_APP1,
    M_STATE_RD_APP2,
    M_STATE_RD_APP3,
    M_STATE_RUN_APP1,
    M_STATE_GET_INFO,
    M_STATE_RST
} t_mStateCodes;



extern  uint32_t usart2_cmd_time_out;
extern  uint32_t usart2_cmd_time_counter;


#endif /* _USART_H */

/**** Copyright (C)2016 sun. All Rights Reserved **** END OF FILE ****/